它被送來回春的原因是鏡片有霧有霉絲。收到鏡頭後，我也以為是一般的霧和霉絲，直到把有問題的鏡片取出後，才發現那看似霉絲的東西和薄霧，是在兩片膠合鏡片中間，也就是說，這支鏡頭的問題不是單純的霉絲和起霧，而是屬於問題比較大的"膠合鏡組脫膠"。
之所以說"問題較大"，是因為修復這問題的過程繁複困難度高，需要精準的黏合，不然光軸一定偏移！ 一般修鏡師傅不會處理這種case。 不過只要順利處理完成，有問題的鏡組就會恢復原本的清澈通透，跟原本的鏡頭沒有差異！
這支鏡頭的脫膠問題最後順利解決！ 恭喜它，也恭喜它主人！！
Hi,
回覆刪除I have an OM 55mm F1.2 Silvernose...
I saw a tiny white dot in the rear element, I tried to open the lens and realised the dot is located BETWEEN the elements that are glued together...
Is there any chance to fix it?
The lens is of very high quality overall, that's why I wanna ask for your advice.
Thanks
Hello,
刪除Thanks for writing me the message.
The only way to remove the dot is to separate the lens group into individual element, and clean surface of the cemented face including the old glue, then re-glue the two element together.
This is a high-end task involving complex process and the work should be done precisely.
I am in Taiwan, and am a professional lens repairman. If needed, you can send me the lens, and I will resolve the problem you have.
You may contact me by email "lin0975165383@gmail.com", and also can review my facebook page "http://lens-cla.blogspot.tw/p/blog-page.html".
Thanks,
Lin
師傅：本人有隻contax 60mm 2.8 裡面有些霉點、想拜託師傅清潔維修、（香港)郵寄可以嗎？
回覆刪除您好
刪除感謝詢問
可以直接從香港寄來給我，沒問題
有不少香港的朋友寄鏡頭來給我維修整理
方便的話，可以用email直接聯絡 lin0975165383@gmail.com
或是到我的facebook留訊息 http://lens-cla.blogspot.tw/p/blog-page.html
感謝
林